Motors & Blowers
Asynchronous motors |
|
| Single phase asynchronous two-pole motor, with die-cast rotor. Stator of low loss magnetic sheet. Shaft in hardened and gruond steel, rotating on revolving self-lubricating bushings. The series M61 motors are available with driving shafts in several diameters and lenghts, and class F as well as class H insulated. These motors can be delivered with several power ratings. |
 |
|
|
Tangential fan blowers |
|
| Air-circulation motor-driven fans: |
 |
|
|
No frost motors |
|
| Two-pole monophase motorfan particularly suitable for use in freezers and refrigerators in general, to ensure ventilation of the cooler supplied with 10 and 12,5 mm stack-height according to the requested performaces. The motor has been designed for long life and will run in and outside the cooler in a temperature range from -30°C to + 60°C. The coil is produced in two versions: epoxy resin capsulated with cables for the fixing of the motor inside the cooler and stripped coil with faston for the fixing outside the cooler. Axial fans are available in 60 – 90 – 100 – 150 mm diameter and radial fan is available in 96 mm. BRUSHLESS: low consumption, electronic motor available in AC and DC version |
 |
|
|
|
Hot air fan blowers |
|
| Two-pole induction motorfan, with diecast rotor, for use in ventilated cooking ovens and generally for every hot air recycling operation. The motorfan is available with or without pre-galvanized fixing plate or diecast aluminium supports. The motorsare available with a stack-height of 15/20/25 mm. |
 |
|
|
|
Damper |
|
| Damper with stepper motor (12V DC), main application currently for no-frost refrigerator-freezers to control the air flow between two separate compartments. This component allows an improved temperature management of the refrigerator cell by means of cold air from the freezer compartment. |  |
External rotor Motors |
|
| Centrifugal capacitor motorfan, with external rotor, particularly suitable for cooker hoods, roof ventilators and whereever high output is required together with reduced overall dimensions. The motor can be supplied with fans made of thermoplastic material or of pre-galvanized steel and are available with several amrature sizes according to the adopted fan and the requested performance. Noiseless, easy to be installed and very reliable, the motorfan for cooker hoods has been designed in class B and is available, on request, with thermoprotector. No specific maintenance is needed.Speed variation is obtained by means of electronic devices or by reducing the voltage with proper resistances. |  |
|
|
|
