Products
ELTH - Product Portfolio
Our product portfolio comprises components for electrodomestic appliances, automotive and industrial applications such as
Automotive
PTC air heater |
|
Heater installed in the vehicle’s air-conditioning system that compensates for the heat deficit of modern and consumption-optimized diesel engines. Due to its high efficiency, it has very low power loss (heat). By using PTC resistors, specified maximum temperatures can be ensured under all ambient conditions. |
 |
|
|
Blow-by heater |
|
The blow-by heater prevents oil penetration toward the air admission and therefore limits the consumption of oil and the clogging of the line. It also prevents the deterioration of the exhaust post-treatment systems, while generating an acceptable load loss. |
 |
|
|
|
HL cleaning system |
|
| HL cleaning system with telescope for optimal positioning of the nozzles in the cleaning cycles. The telescope provides maximum performance when it comes to achieving a superior cleaning performance on even the most challenging headlamp designs and offers at the same time a reduced use of washing fluids. The telescope allows the use of covers that are integrated into the bumpers. Certification according to ECE 45 |
 |
|
|
|
Blow moulded washer bottles |
|
Blow moulded washer tank for windscreen and headlamp washing. The bottles can be supplied as a system including all components such as pumps, level sensors and tubes. Transport is an issue with somewhat bulky products. As a major benefit, out bottles can be supplied from various locations worldwide. 100% of our products are leak tested. |
 |
|
|
|
Injection moulded washer bottles |
|
| Injection mouldedwasher tank for windscreen and headlamp washing. The bottles can be supplied as a system including all components such as pumps, level sensors and tubes. Transport is an issue with somewhat bulky products. As a major benefit, out bottles can be supplied from various locations worldwide. 100% of our products are leak tested. |
 |
|
|
|
Temperature Switches |
|
| Fast snapping bimetallic temperature switches sensitive to temperature variations. |  |
|
|
|
Diesel Fuel Heaters |
|
ELTH offers different versions of diesel heaters.
|
 |
|
|
|
Air & diesel temp. sensors |
|
| The ELTH series 269.8 and 269.3 are used in automotive applications for sensing fuel and inlet air temperatures, data required by motor management unit to guarantee low emission levels. |  |
|
|
|
Temp. sensor with cap |
|
The ELTH 269 series covers the whole range of automotive sensors and combined sensor-switch assemblies. The 269 types can be made according to customer specifications. |
 |
|
|
|
Temp. sensor with brass body |
|
| The ELTH 269.0, 269.1 and 269.3 series covers the whole range of automotive sensors and combined sensor-switch assemblies. |  |
|
|
|
Oil level sensors |
|
| The ELTH 269.2 series sensors are designed to measure oil liquid level and oil temperature in the motor sump. Oil level measurements are performed continously in operating conditions or only once at motor start-up. Simplified probes will only contain level sensing function. |  |
|
|
|
Appliances
Adjustable t-stat |
|
| Type 260 adjustable t-stats in various versions with adjustable and fixed temperature settings, special version for irons and with separate bimetal strip. The ELTH 260 thermostat can be used in any device where an adjustable temperature of up to 300°C is requested. |
 |
|
|
|
Half inch bimetallic switches |
|
| Fast acting 1/2" single pole thermometric switch sensitive to temperature variations. They are manufactured in the versions automatic reset, manual reset, 16A rated current or to be mounted in a multithermostat unit. |
 |
|
|
|
No-frost thermostat |
|
| This variant within our range of 1/2" bimetallic switches type 261 is humidity-tight and assembled in a synthetic fibre-glass reinforced casing with or without one or two supplementary temperature fuses. |  |
|
|
|
3/4 inch t-stats |
|
| 3/4" bimetallic temperature switches, manufactured as single pole temperature (type 262)or double pole (type 263) version, both with automatic reset, manual reset or in 45A version. |
 |
|
|
|
High temperature switch |
|
| Fast acting single pole thermometric switch made of ceramic. It is sensitive to temperature variations and manufactured with automatic or manual reset and with 16A contacts. |  |
|
|
|
Temp. sensors |
|
| The 279 series covers the whole range of sensors. They can be incorporated in the housing of type 261 or as a "cartridge type" housing. They are all equipped with an NTC thermistor whose ohmic value decreases with rising temperature. |
 |
|
|
|
